Magnetic properties,phase evolution,hollow structure and biomedical application of hematite (α-Fe2O3) and QUAIPH

We investigate synthesis, phase evolution, hollow and porous structure and magnetic properties of quasi-amorphous intermediate phase (QUAIPH) and hematite (α-Fe₂O₃) nanostructure synthesized by annealing of akaganeite (β-FeOOH) nanorods. It is found that the annealing temperature determines the phase composition of the products, the crystal structure/size dictates the magnetic properties whereas the final nanorod morphology is determined by the starting material. Annealing of β-FeOOH at ～300 °C resulted in the formation of hollow QUAIPH nanorods. The synthesized material shows low-cytotoxicity, superparamagnetism and good transverse relaxivity, which is rarely reported for QUAIPH. The QUAIPH nanorods started to transform to porous hematite nanostructures at ～350 °C and phase transformation was completed at 600 °C. During the annealing, the crystal structure changed from monoclinic (akaganeite) to quasi-amorphous and rhombohedral (hematite). Unusually, the crystallite size first decreased (akaganeite → QUAIPH) and then increased (QUAIPH → hematite) during annealing whereas the nanorods retained particle shape. The magnetic properties of the samples changed from antiferromagnetic (akaganeite) to superparamagnetic with blocking temperature T_B = 84 K (QUAIPH) and finally to weak-ferromagnetic with the Morin transition at T_M = 244 K and high coercivity H_C = 1652 Oe (hematite). The low-cytotoxicity and MRI relaxivity (r₂ = 5.80 mM^?1 s^?1 (akaganeite), r₂ = 4.31 mM^?1 s^?1 (QUAIPH) and r₂ = 5.17 mM^?1 s^?1 (hematite)) reveal potential for biomedical applications.     

Continuous in-line decontamination of food-processing surfaces using cold atmospheric pressure air plasma

This study assessed a continuous in-line decontamination system for food contact surfaces and processing equipment that utilized cold atmospheric pressure plasma (CAP) generated from ambient air. The plasma system was evaluated against two common foodborne pathogens (Salmonella Typhimurium, Listeria monocytogenes) on stainless steel surfaces and against S Typhimurium on commercial poly[ether]-thermoplastic poly[urethane] (PE-TPU) conveyor belts, under simulated conditions of a food-processing facility. A significant level of microbial inactivation was achieved, up to 3.03 ± 0.18 and 2.77 ± 0.71 logCFU/mL reductions of L. monocytogenes and S. Typhimurium respectively within 10 s total treatment on stainless steel surfaces, and a 2.56 ± 0.37 logCFU/mL reduction of S. Typhimurium within 4 s total treatment on the PE-TPU material, according to a procedure based on the well-established EN 13697:2015 industrial protocol. CAP exposure was shown to have a minor impact on the morphology and composition of the treated surfaces. The results indicated that CAP can be applied for effective and continuous disinfection against common foodborne pathogens in food-processing facilities.Industrial relevanceLow temperature plasmas have shown great promise for microbial decontamination, yet industrial uptake of the technology has been limited due to scaling limitations. In this study, a prototype conveyor-based CAP decontamination system was developed and tested under realistic conditions expected within a food-processing facility. The results showed a high level of antimicrobial action against two common foodborne pathogens within a few seconds of CAP exposure, a timescale in line with industrial line processing speeds. Our findings demonstrated that CAP shows great promise for the continuous in-situ decontamination of food contact surfaces, with the potential to mitigate against the costly downtimes incurred in current production line practices implementing chemical disinfectants.     

Formation of single-crystalline BaTiO3 nanorods from glycolate by tuning the supersaturation conditions

We have studied peculiarities in the formation of single-crystalline barium titanate (BaTiO₃) nanorods from a glycolate-mediated complex via a single-step hydrothermal process under different supersaturation (S_R) conditions. X-ray diffraction (XRD) showed the formation of pure BaTiO₃ with an S_R of above 19. The tetragonality for the BaTiO₃ (c/a) reached 1.013 at S_R = 19–29 and dropped to 1.010 for S_R = 39. According to the transmission electron microscopy (TEM) and XRD analyses, the rod-shaped particles exhibited single crystallinity and crystal growth along the [001] plane. With scanning electron microscopy (SEM), the morphological evolution from a plate-shaped intermediate precursor (S_R = 6–9) to a rod-shaped product with an aspect ratio of 6–9 (S_R = 19–29), and to non-polar material with an irregular structure (S_R = 39), was observed. The negative slope, linear dependence of the particles’ width and length on the supersaturation level in the range S_R = 19–39 was established for the first time. The replacement of the prevailing crystallization mechanism from in-situ topotactic transformation into dissolution-precipitation above S_R = 19 was observed. It was shown that with a simple regulation of the S_R, the structural and morphological characteristics of the obtained BaTiO₃ nanoparticle can be effectively tuned.     

Evaluation of a Novel Plasmid for Simultaneous Gene Electrotransfer-Mediated Silencing of CD105 and CD146 in Combination with Irradiation

Targeting tumor vasculature through specific endothelial cell markers represents a promising approach for cancer treatment. Here our aim was to construct an antibiotic resistance gene-free plasmid encoding shRNAs to simultaneously target two endothelial cell markers, CD105 and CD146, and to test its functionality and therapeutic potential in vitro when delivered by gene electrotransfer (GET) and combined with irradiation (IR). Functionality of the plasmid was evaluated by determining the silencing of the targeted genes using qRT-PCR. Antiproliferative and antiangiogenic effects were determined by the cytotoxicity assay tube formation assay and wound healing assay in murine endothelial cells 2H-11. The functionality of the plasmid construct was also evaluated in malignant melanoma tumor cell line B16F10. Additionally, potential activation of immune response was measured by induction of DNA sensor STING and proinflammatory cytokines by qRT-PCR in endothelial cells 2H-11. We demonstrated that the plasmid construction was successful and can efficiently silence the expression of the two targeted genes. As a consequence of silencing, reduced migration rate and angiogenic potential was confirmed in 2H-11 endothelial cells. Furthermore, induction of DNA sensor STING and proinflammatory cytokines were determined, which could add to the therapeutic effectiveness when used in vivo. To conclude, we successfully constructed a novel plasmid DNA with two shRNAs, which holds a great promise for further in vivo testing.     

Ultra-high temperature ceramics based on ZrB2 obtained by pressureless sintering with addition of Cr3C2, Mo2C,and WC

ZrB₂-MeC and ZrB₂-19 vol% SiC-Me_xC_y where Me=Cr, Mo, W were obtained by pressureless sintering. The capability to promote densification of ZrB₂ and ZrB₂-SiC matrices is the highest for WC and lowest for Cr₃C₂. The interaction between the components results in the formation of new phases, such as MeB (MoB, CrB, WB), a solid solution based on ZrC, and a solid solution based on ZrB₂. The addition of Cr₃C₂ decreases the mechanical properties. On the other hand, the addition of Mo₂C or WC to ZrB₂-19 vol% SiC composite ceramics leads increased mechanical properties. Long-term oxidation of ceramics at 1500 °C for 50 h showed that, in binary ZrB₂-Me_xC_y, a protective oxide scale does not form on the surface thus leading to the destruction of the composite. On the contrary, triple composites showed high oxidation resistance, due to the formation of dense oxide scale on the surface, with ZrB₂-SiC-Mo₂C displaying the best performance.     

Decision Support for the Comparative Evaluation and Selection of Analytical Methods: Detection of Genetically Modified Organisms as an Example

The selection of the best-fit-for-purpose analytical method to be implemented in the laboratory is difficult due to availability of multiple methods, targets, aims of detection, and different kinds and sources of more or less reliable information. Several factors, such as method performance, practicability, cost of setup, and running costs need to be considered together with personnel training when selecting the most appropriate method. The aim of our work was to prepare a flexible multicriteria decision analysis model suitable for evaluation and comparison of analytical methods used for the purpose of detecting and/or quantifying genetically modified organisms, and to use this model to evaluate a variety of changing analytical methods. Our study included selection of PCR-, isothermal-, protein-, microarray-, and next-generation sequencing-based methods in simplex and/or multiplex formats. We show that the overall result of their fitness for purpose is relatively similar; however, individual criteria or a group of related criteria exposed more substantial differences between the methods. The proposed model of this decision support system enables easy modifications and is thus suitable for any other application of complex analytical methods.     

Stationary and Progressive Phenotypes Caused by the p.G90D Mutation in Rhodopsin Gene

Mutations in rhodopsin gene (RHO) are a frequent cause of retinitis pigmentosa (RP) and less often, congenital stationary night blindness (CSNB). Mutation p.G90D has previously been associated with CSNB based on the examination of one family. This study screened 60 patients. Out of these 60 patients, 32 were affected and a full characterization was conducted in 15 patients. We described the clinical characteristics of these 15 patients (12 male, median age 42 years, range 8–71) from three families including visual field (Campus Goldmann), fundus autofluorescence (FAF), optical coherence tomography (OCT) and electrophysiology. Phenotypes were classified into four categories: CSNB (N = 3, 20%) sector RP (N = 3, 20%), pericentral RP (N = 1, 6.7%) and classic RP (N = 8, 53.3% (8/15)). The phenotypes were not associated with family, sex or age (Kruskal–Wallis, p > 0.05), however, cystoid macular edema (CME) was observed only in one family. Among the subjects reporting nyctalopia, 69% (22/32) were male. The clinical characteristics of the largest p.G90D cohort so far showed a large frequency of progressive retinal degeneration with 53.3% developing RP, contrary to the previous report.     

Depassivation and repassivation of stainless steels by stepwise pH change

Immersion tests with different stainless steels have been performed, while the pH was stepwise decreased and then increased again. During 8.5-day exposure, the depassivation and repassivation pH values as a function of pitting resistance equivalent number were determined. There is always a gap between both pH values (depassivation and repassivation), indicating that for every steel, there are conditions where an existing passive layer can be maintained but cannot be rebuilt after depassivation. In such environments, the passive layer is thicker, consisting mainly of molybdenum and iron rich oxides, while chromium is dissolved. Usually, depending on conditions, the passive layer is more chromium-rich, especially the inner layer. This is relevant, for example, for acidizing jobs in oil and gas industry, proving that repassivation after acidizing will happen promptly, when the pH is increased again.     

Absorbed in technology but digitally overloaded: Interplay effects on gig workers’ burnout and creativity

Technology has facilitated platform-mediated work, and individuals are often encouraged to engage with technology using various digital solutions. However, for platform workers, the use of technology can lead to digital overload, which may negatively impact their burnout and performance. In this paper, we examine the interplay between individuals’ cognitive absorption in technology and technology overload in predicting gig workers’ creative output. Using empirical data from 263 Amazon Mechanical Turk platform workers, we show that cognitive absorption positively predicts gig workers’ creativity. However, moderated-mediation analysis shows that in the case of high technology overload, cognitive absorption with technology leads to burnout and reduces creativity levels of the workers     

Condition based maintenance of the two-beam laser welding in high volume manufacturing of piezoelectric pressure sensor

Two-beam laser welding (TBLW) is an advanced process for precise, low distortion joining of cylindrical miniature parts. The process is composed of a laser source, optics and various actuators, which form a sophisticated system for control and maintenance in high volume manufacturing. A well-established method for identifying welding defects and ensuring welding quality is the monitoring of plasma light emission in TBLW. Although such monitoring systems can detect a change in process status, they are not able to diagnose the nature of the fault. The main challenge in this research was to extend the use of quality-based monitoring systems to measure additional deterioration-related parameters and to estimate system deterioration from them by using expert knowledge.This paper shows a novel condition-based maintenance (CBM) for the TBLW system, which performs condition identification using online monitoring of plasma light emission in combination with offline inspection of the seam macrographs. A combination of quality parameters derived from seam macrographs of defective parts is used to identify process deterioration, such as contamination of the optics, misalignment of the optomechanical system, or reduced laser power. The information obtained is used to make predefined process adjustments based on expert domain knowledge. The implementation of the developed CBM in high volume manufacturing of piezoelectric pressure sensors resulted in more predictable TBLW by reducing system failures as well as shorter diagnosis times.